multipath-tools (0.4.9-3ubuntu7.15) trusty; urgency=medium

  * d/p/0047-Add-existing-multipath-devices-to-wwids-file-on.patch:
    Fix multipathd which does not update /etc/multipath/wwids file
    when reconfigure is invoked. (LP: #1621835)

  [ Dragan Stancevic ]
  * d/p/0048-multipathd-delay-free-pathvec.patch :
    Fix SEGV on multipathd shutdown (LP: #1616213) 

  [ Nishanth Aravamudan ]
  * debian/patches/fix_use_after_free.patch: Fix use-after-free bugs.
    Thanks to Christof Schmitt <christof.schmitt@de.ibm.com> and
    Benjamin Marzinski <bmarzins@redhat.com>.  Closes LP:  #1628723.

 -- Louis Bouchard <louis.bouchard@ubuntu.com>  Mon, 12 Sep 2016 10:43:19 +0200

multipath-tools (0.4.9-3ubuntu7.14) trusty; urgency=medium

  * d/p/0045-fix-mpp_alias-freeing.patch, d/p/0046-revert-act_reload.patch:
    Fix double-free situation that generate segfaults with multipathd
    (LP: #1535898)

 -- Louis Bouchard <louis.bouchard@ubuntu.com>  Tue, 28 Jun 2016 11:53:32 +0200

multipath-tools (0.4.9-3ubuntu7.13) trusty; urgency=medium

  * debian/patches/0001-multipath-fix-setting-sysfs-fc-timeout-parameters.patch:
    multipath was not setting fiberchannel sysfs params correctly. (LP: #1578654)

 -- Dan Streetman <dan.streetman@canonical.com>  Tue, 07 Jun 2016 15:23:21 +0200

multipath-tools (0.4.9-3ubuntu7.12) trusty; urgency=medium

  * 0044-multipath-check-for-NULL-from-udev_device_get.patch (LP: #1532789) 

 -- Rafael David Tinoco <rafael.tinoco@canonical.com>  Thu, 12 May 2016 11:03:37 +0200

multipath-tools (0.4.9-3ubuntu7.11) trusty; urgency=medium

  * debian/patches/series: add dm-multipath-backlist-nvme-5c412e47.patch to
    the series file; it was missing in the previous upload and thus the patch
    intending to fix bug 1551828 was not applied. (LP: #1551828)

 -- Mathieu Trudel-Lapierre <mathieu-tl@ubuntu.com>  Mon, 21 Mar 2016 10:41:36 -0400

multipath-tools (0.4.9-3ubuntu7.10) trusty; urgency=medium

  [ Mathieu Trudel-Lapierre ]
  * debian/patches/dm-multipath-backlist-nvme-5c412e47.patch: blacklist NVMe
    from multipath, otherwise kpartx calls will hang. This is because mpath
    works at the request level (which NVMe bypasses), so multipathing is not
    supported on NVMe. (LP: #1551828)

  [ Mauricio Faria de Oliveira ]
  * Remove partition device nodes of individual paths (for LVM on multipath)
    (LP: #1540401)
    - debian/multipath-tools.dm-mpath-lvm.udev: udev rule for that.
    - debian/initramfs/hooks: copy the udev rule and partx to the initramfs.
    - debian/initramfs/init-top: load dm-multipath module for 'multipath -c'.
    - debian/rules: install the udev rule and init-top.

 -- Mathieu Trudel-Lapierre <mathieu-tl@ubuntu.com>  Tue, 01 Mar 2016 13:53:27 -0500

multipath-tools (0.4.9-3ubuntu7.9) trusty; urgency=medium

  * debian/patches/kpartx-support-device-names-with-spaces.patch: fix loopback
    files unmapping. (LP: #1543430)

 -- Mathieu Trudel-Lapierre <mathieu-tl@ubuntu.com>  Tue, 09 Feb 2016 16:03:10 -0500

multipath-tools (0.4.9-3ubuntu7.8) trusty; urgency=medium

  * debian/patches/kpartx-support-device-names-with-spaces.patch: deal with
    spaces in device names in kpartx too (LP: #1432062)
  * debian/initramfs/local-premount: wait for udev to settle before mounting
    so the by-uuid/ symlinks have a chance to be updated by udev rules.
    (LP: #1503286)
  * Allow device detection all through the initramfs: run multipathd instead
    of only scanning once for devices, so those that come up slower can still
    be used as a root device (LP: #1526984):
    - debian/patches/0050-readonly-bindings_prefix.patch,
      debian/patches/0051-readonly-bindings_multipath.patch,
      debian/patches/0052-readonly-bindings_multipathd.patch,
      debian/patches/0053-readonly-bindings_multipathd_prod.patch: support -B
      to allow multipathd to handle cases where the bindings file is read-only.
    - debian/initramfs/hooks: install multipathd and required directories.
    - debian/initramfs/local-premount: also reload all maps to make sure
      they're ready before we mount.
    - debian/initramfs/local-top: run multipathd rather than a one-off call to
      multipath so that new paths can be correctly added as detected while
      we're still in the initramfs.
    - debian/initramfs/local-bottom: remember to stop multipathd.
    - debian/initramfs/local-bottom, debian/rules: install local-bottom for
      initramfs.
  * debian/patches/lp1496210_add_IBM_XIV_defaults.patch: add support (default
    config values) for the IBM 2810XIV storage system. (LP: #1496210)
  * debian/patches/0054-kpartx-update-option.patch: run kpartx -u rather than
    kpartx -a, so as to remove old partition entries if the partition table
    has changed. (LP: #1473903)
  * debian/patches/multipath_enable_sync_support_1b8082c8.patch,
    debian/patches/kpartx_rely_on_udev_dev_creation_9a632fff.patch: synchronize
    udev, device-mapper and multipath, and let udev deal with creating device
    nodes and symlinks. (LP: #1486370)
  * debian/initramfs/local-top: drop scsi_wait_scan stanza, that module is no
    longer available. (LP: #1538775)

 -- Mathieu Trudel-Lapierre <mathieu-tl@ubuntu.com>  Mon, 01 Feb 2016 10:36:41 -0500

multipath-tools (0.4.9-3ubuntu7.7) trusty; urgency=medium

  * debian/patches/lp1503305_libmultipath_info_on_1st_path_down_dbd131e.patch:
    Correctly display vendor/model info for a path group even if the first path
    of the group is failed. (LP: #1503305)

 -- Mathieu Trudel-Lapierre <mathieu-tl@ubuntu.com>  Tue, 15 Dec 2015 13:52:49 -0500

multipath-tools (0.4.9-3ubuntu7.6) trusty; urgency=medium

  * debian/patches/0043-alloc-keywords.patch: fix uninitialized keywords
    vector for configuration parsing for when there is no multipath.conf file
    present.

 -- Mathieu Trudel-Lapierre <mathieu-tl@ubuntu.com>  Tue, 06 Oct 2015 22:13:59 -0400

multipath-tools (0.4.9-3ubuntu7.5) trusty; urgency=medium

  * Cherry-picked patches to ignore local non-mpath devices:
    (LP: #1386637, #1468897)
    - 0001-multipath-add-checker_timeout-default-config-option.patch
    - 0002-Make-params-variable-local.patch
    - 0003-libmultipath-Fix-possible-string-overflow.patch
    - 0004-Update-hwtable-factorization.patch
    - 0005-Fixup-strip-trailing-whitespaces-for-getuid-return-v.patch
    - 0006-Remove-sysfs_attr-cache.patch
    - 0007-Move-setup_thread_attr-to-uevent.c.patch
    - 0008-Use-lists-for-uevent-processing.patch
    - 0009-Start-uevent-service-handler-from-main-thread.patch
    - 0010-libmultipath-rework-sysfs-handling.patch
    - 0011-Rework-sysfs-device-handling-in-multipathd.patch
    - 0012-Only-check-offline-status-for-SCSI-devices.patch
    - 0013-Check-for-offline-path-in-get_prio.patch
    - 0014-libmultipath-Remove-duplicate-calls-to-path_offline.patch
    - 0015-Update-dev_loss_tmo-for-no_path_retry.patch
    - 0016-Reload-map-for-device-read-only-setting-changes.patch
    - 0017-multipath-get-right-sysfs-value-for-checker_timeout.patch
    - 0018-multipath-handle-offlined-paths.patch
    - 0019-multipath-fix-scsi-timeout-code.patch
    - 0020-multipath-make-tgt_node_name-work-for-iscsi-devices.patch
    - 0021-multipath-cleanup-dev_loss_tmo-issues.patch
    - 0022-Fix-for-setting-0-to-fast_io_fail.patch
    - 0023-Fix-fast_io_fail-capping.patch
    - 0024-multipath-enable-getting-uevents-through-libudev.patch
    - 0025-Use-devpath-as-argument-for-sysfs-functions.patch
    - 0026-multipathd-remove-references-to-sysfs_device.patch
    - 0027-multipathd-use-struct-path-as-argument-for-event-pro.patch
    - 0028-Add-global-udev-reference-pointer-to-config.patch
    - 0029-Use-udev-enumeration-during-discovery.patch
    - 0030-use-struct-udev_device-during-discovery.patch
    - 0031-More-debugging-output-when-synchronizing-path-states.patch
    - 0032-Use-struct-udev_device-instead-of-sysdev.patch
    - 0033-discovery-Fixup-cciss-discovery.patch
    - 0035-Use-udev-devices-during-discovery.patch
    - 0036-Remove-all-references-to-hand-craftes-sysfs-code.patch
    - 0037-multipath-libudev-cleanup-and-bugfixes.patch
    - 0038-multipath-check-if-a-device-belongs-to-multipath.patch
    - 0039-multipath-and-wwids_file-multipath.conf-option.patch
    - 0040-multipath-Check-blacklists-as-soon-as-possible.patch
    - 0041-add-wwids-file-cleanup-options.patch
    - 0042-add-find_multipaths-option.patch
  * debian/rules: don't ship 95-multipath.rules udev rules anymore; they are
    not necessary with multipath-tools listening for udev events directly.
  * debian/multipath.udev: removed.
  * debian/multipath-tools.postinst: run multipath -W so that we get a properly
    formed wwids file on upgrade.
  * debian/initramfs/hooks: copy the wwids file in the initramfs so that it is
    available when multipath-tools initially discovers path to possibly bring
    up the rootfs.

 -- Mathieu Trudel-Lapierre <mathieu-tl@ubuntu.com>  Thu, 23 Jul 2015 14:57:42 -0400

multipath-tools (0.4.9-3ubuntu7.4) trusty; urgency=medium

  * Remove 0024-ignore-usb.patch: Ignore USB devices. Verification fails
    for this fix; it needs more work.

 -- Mathieu Trudel-Lapierre <mathieu-tl@ubuntu.com>  Mon, 27 Jul 2015 13:48:39 -0400

multipath-tools (0.4.9-3ubuntu7.3) trusty; urgency=medium

  * Added debian/patches/0015-shared-lock-for-udev.patch (LP: #1431650)
  * Support disks with non 512-byte sectors (LP: #1441930)
  * Correctly write FC timeout attributes to sysfs. (LP: #1435706)
  * Ignore USB devices. (LP: #1468897)

 -- Mathieu Trudel-Lapierre <mathieu-tl@ubuntu.com>  Wed, 15 Jul 2015 12:20:28 -0400

multipath-tools (0.4.9-3ubuntu7.2) trusty; urgency=medium

  * 1002-fix-linking-library.patch: Move $(LIBDEPS) to the end of the
    link line to fix underlinking with ld --as-needed (LP: #1004243)

 -- Adam Conrad <adconrad@ubuntu.com>  Mon, 13 Oct 2014 07:47:07 -0600

multipath-tools (0.4.9-3ubuntu7.1) trusty; urgency=medium

  * Added 0011-libmultipath-update-waiter-handling.patch (LP: #1354114)
  * Added 0012-Race-condition-when-calling-stop_waiter_thread.patch (LP: #1354114)
  * Added 0013-multipath-clean-up-code-for-stopping-the-waiter-thre.patch (LP: #1354114)
  * Added 0014-Fix-race-condition-in-stop_waiter_thread.patch (LP: #1354114)

 -- Rafael David Tinoco <rafael.tinoco@canonical.com>  Thu, 07 Aug 2014 16:15:25 -0300

multipath-tools (0.4.9-3ubuntu7) raring; urgency=low

  * Add 0010-fix-extended-partitions.patch: Only expose the
    first two sectors of the extended partition (LP: #1093918).

 -- Phillip Susi <psusi@ubuntu.com>  Fri, 04 Jan 2013 16:14:34 -0500

multipath-tools (0.4.9-3ubuntu6) quantal; urgency=low

  * Rebuild for new armel compiler default of ARMv5t.

 -- Colin Watson <cjwatson@ubuntu.com>  Fri, 05 Oct 2012 14:00:37 +0100

multipath-tools (0.4.9-3ubuntu5) precise; urgency=low

  * Split kpartx initramfs bits into kpartx-boot for dmraid (LP: #941874)

 -- Phillip Susi <psusi@ubuntu.com>  Tue, 20 Mar 2012 15:26:22 -0400

multipath-tools (0.4.9-3ubuntu4) precise; urgency=low

  * Restore multipath-udeb dependency on multipath-modules (LP: #959749).

 -- Colin Watson <cjwatson@ubuntu.com>  Wed, 21 Mar 2012 14:34:01 +0000

multipath-tools (0.4.9-3ubuntu3) precise; urgency=low

  * Move kpartx from multipath-udeb to a new kpartx-udeb package
    (LP: #922646).

 -- Colin Watson <cjwatson@ubuntu.com>  Fri, 27 Jan 2012 23:04:23 +0000

multipath-tools (0.4.9-3ubuntu2) precise; urgency=low

  * Add 0009-fix-delim.patch: The 'p' delimiter was being added
    when it shouldn't.

 -- Phillip Susi <psusi@ubuntu.com>  Sun, 08 Jan 2012 20:57:47 -0500

multipath-tools (0.4.9-3ubuntu1) precise; urgency=low

  * Merge with Debian (for remaining changes, see 0.4.9-2ubuntu1).

 -- Matthias Klose <doko@ubuntu.com>  Sun, 04 Dec 2011 21:32:48 +0100

multipath-tools (0.4.9-3) unstable; urgency=low

  * [dd85b8b] Add example to kpartx manpage. Committed upstream.
    Thanks to Lars Wirzenius (Closes: 637538)
  * [652acf5] Add Brazilian Portuguese debconf templates translation.
    Thanks to Flamarion Jorge (Closes: 640802)
  * [71df377] Add Danish translation of the debconf templates multipath-tools.
    Thanks to Joe Hansen (Closes: #628225)
  * [19ab90f] Avoid unnecessary linkage to ncurses library.
    Thanks to Sven Joachim (Closes: 646148)

 -- Ritesh Raj Sarraf <rrs@debian.org>  Sat, 03 Dec 2011 19:34:59 +0530

multipath-tools (0.4.9-2ubuntu1) oneiric; urgency=low

  * Merge from debian unstable, remaining changes:
    - control:
      * Bump debhelper dependency to install udev rules to
       /lib/udev/rules.d, bump udev dependencies as well.
      * multipath-udeb must not depend on multipath-modules, 
        because the Ubuntu kernel already includes the modules and no 
        package provides m-m.
    - initramfs/hooks: use 95 not 60 for multipath rules priority
    - multipath-tools-boot.init: remove in favor of kpartx.udev rules (at top)
    - kpartx.udev:
      * add rule to load dm-multipath
      * use whole path when running /usr/lib/dmsetup_env
      * call kpartx through dmsetup for mpath-* devices
      * switch $name for $kernel for dmraid rule
    - multipath-tools.preinst: modprobe dm-multipath.
      This will make sure that multipathd will be able to start.
    - patches/1000--set-umask-in-multipathd.patch: Set umask in multipathd.
    - rules: Move udev rules to priority 95, because rules that load
      modules should be >90.
    - Have initramfs local-top start with scsi_wait_scan, and make sure all
      devices have been found before bothering to call udevadm settle.
    - debian/initramfs/local-top: wait for scsi_wait_scan
  * *.install: use /lib*/ instead of /lib/ to catch /lib64
  * debian/initramfs/local-top: remove '--timeout 10' which causes my
    test system to not boot roughly 3 out of 4 times.

 -- Serge Hallyn <serge.hallyn@ubuntu.com>  Mon, 06 Jun 2011 12:31:23 -0500

multipath-tools (0.4.9-2) unstable; urgency=low

  * [2544655] wait harder for multipath init. Thanks to Serge Hallyn for
    the patch
  * [eb87e52] switch to 3.0 quilt source format
  * [e55a306] explictly mention license copyright
  * [52db82f] update vcs headers
  * [8313f77] with dpkg > 1.15.7 we now don't need XC
  * [8fdf077] update short description for multipath udeb package
  * [c409ef3] add misc:Depends for multipath-udeb
  * [c890181] take maintenance of package (Closes: #607911)
  * [09bbbc8] add debugging symbols package. Thanks to Craig Magina.
    (Closes: #609068)
  * [2e6f8a7] spelling/hyphen fixes
  * [97e02e7] add manpage for read-only mappings
  * [5419352] add-r-to-make-resulting-device-read-only. Thanks to Wakko Warner
    for the patch (Closes: #504678)

 -- Ritesh Raj Sarraf <rrs@debian.org>  Sat, 05 Mar 2011 03:22:32 +0530

multipath-tools (0.4.9-1) unstable; urgency=low

  [ Guido Günther ]
  * New upstream version 0.4.9 (Closes: #587315, #595127)
  * [500e341] Don't fail "mulitipath-tools start" if multipathd is
    already running (Closes: #587678)
  * [f4e697c] Drop upstream patches:
      * 0001-Fix-udev-rules-for-dmraid.patch
      * 0003-fix-URL-to-FAQ.patch
      * 0004-check-header-file-for-defintion-of-dm_task_no_flush.patch
      * 0005-set-a-soname.patch
      * 0006-add-library-dependencies.patch
      * 0007-multipath-tools-rdac-path-checked-leads-to-I-O-hang-.patch
      * 0010-Dots-are-special-in-groff.patch
      * 0011-multipath-fix-offset-for-containted-slices.patch
  * [678dcb6] Bindings file moved to /etc/multipath
  * [ac2f9d5] Bump standards version
  * [baea3a2] Add upstream homepage
  * [9daa1b8] Remove /usr from $PATH so lintian doesn't assume we're
    calling scripts from $remove_fs.
  * [1a3c85e] Update po files

 -- Guido Günther <agx@sigxcpu.org>  Wed, 01 Sep 2010 15:10:26 +0200

multipath-tools (0.4.8+git0.761c66f-9) unstable; urgency=low

  * [0435cc1] Make sure the patchcheckers end up in /lib (Closes: #581377)
  * [858f733] New patch 0011-multipath-fix-offset-for-containted- slices.patch
    multipath: fix offset for containted slices. (Closes: #586104) - thanks to
    Benjamin Marzinski

 -- Guido Günther <agx@sigxcpu.org>  Wed, 16 Jun 2010 20:02:47 +0200

multipath-tools (0.4.8+git0.761c66f-8) unstable; urgency=low

  * [16268d8] Drop path from dmsetup_env call - thanks to Ferenc Wagner
  * [2f3bdd5] Use $name in multipath.udev as well - thanks to Ferenc Wagner
    for testing
  * [c978487] Don't pass -g on mips(el) to work around a binutils bug.  See
    http://sources.redhat.com/bugzilla/show_bug.cgi?id=10144 for details.
  * [9daf438] Make sure we discover multipaths before checkfs/mountall runs
    This covers the cornercase where e.g. /home is on multipath (but not on
    LVM) and multipath-tols aren't started via initramfs. (Closes: #577172)
  * [f7cc840] Bump standards version

 -- Guido Günther <agx@sigxcpu.org>  Sun, 11 Apr 2010 13:22:35 +0200

multipath-tools (0.4.8+git0.761c66f-7) unstable; urgency=low

  * [13f7436] Properly add multipath-udeb to dh_makeshlibs (Closes: #564489) -
    thanks to again Frans Pop

 -- Guido Günther <agx@sigxcpu.org>  Sat, 23 Jan 2010 00:14:04 +0100

multipath-tools (0.4.8+git0.761c66f-6) unstable; urgency=low

  * [5b0c7be] Fix dependency on nonexistent multipath-tools udeb (Closes:
    #564489) - thanks to Frans Pop
  * [c2a06f7] New patch debian/patches/0010-Dots-are-special-in- groff.patch
    Dots are special in groff

 -- Guido Günther <agx@sigxcpu.org>  Sun, 10 Jan 2010 18:10:05 +0100

multipath-tools (0.4.8+git0.761c66f-5) unstable; urgency=low

  * [9c68527] Explicitly include posix_types.h to get the correct type for
    __kernel_old_dev_t (Closes: #558990)

 -- Guido Günther <agx@sigxcpu.org>  Sat, 05 Dec 2009 18:14:05 +0100

multipath-tools (0.4.8+git0.761c66f-4) unstable; urgency=low

  * [eb7bcf2] Add kpartx_id to initramfs for persistent partition links.
  * [7ecd444] Use $name instead of $kernel since 2.6.31 doesn't create
    /dev/dm-* anymore.

 -- Guido Günther <agx@sigxcpu.org>  Sat, 21 Nov 2009 21:11:31 +0100

multipath-tools (0.4.8+git0.761c66f-3) unstable; urgency=low

  * upload to unstable
  * [f62b619] Tighten multipath-tools-boot dependency Older versions might not
    be able to cope with renamed patch checkers, etc.
  * [7bb23db] Add udev rules to initramfs This makes the initramfs properly
    event based. Once #455979 is fixed in LVM, root on lvm on multipatph can
    work reliably. (Closes: #539498)
  * [d9fcc80] Another init script dependency fix (Closes: #542370) - thanks to
    Petter Reinholdtsen
  * [3faab35] redo patches
  * [c903696] Make user_friendly_names compatible to multipath-tools 0.4.8 and
    earlier

 -- Guido Günther <agx@sigxcpu.org>  Sat, 21 Nov 2009 18:04:07 +0100

multipath-tools (0.4.8+git0.761c66f-2) experimental; urgency=low

  * [34758f1] don't install files into /lib64 on 64 bit architectures - thanks
    to Pascal de Bruijn
  * [2b0a3da] use libreadline-dev (Closes: #553813)
  * [8394b3a] cherry-pick 362d2e5f215894818b52a0d03b723b75917390fb (Closes:
    #555901)

 -- Guido Günther <agx@sigxcpu.org>  Thu, 12 Nov 2009 17:35:28 +0100

multipath-tools (0.4.8+git0.761c66f-1) experimental; urgency=low

  * upload current git snapshot to experimental
  * [71c9c74] warn about user_friendly_names and suggest using /dev/disk/by-id/
  * [329762e] increase locking timeout on bindings file to 30 secs - thanks to
    Ritesh Raj Sarraf for the patch
  * [759ad9b] add spanish translation (Closes: #528972) - thanks to Fernando
    González de Requena
  * [7c327fa] add Czech translation (Closes: #533524) - thanks to Tomas Fidler
  * [49c78ba] drop patches merged upstream:
        * 0001-get-rid-of-arch-specific-ifdef-spaghettis.patch
        * 0002--libmultipath-filter_wwid-is-called-with-the-wron.patch
        * 0004--kpartx-fix-extended-partition-handling.patch
        * 0005--kpartx-remove-partitions-in-reverse-order.patch
        * 0006--kpartx-documentation-fixes.patch
        * 0007--kpartx-remove-dead-code.patch
        * 0008-udev-as-of-0.124-doesn-t-support-scsi_id-s-anymor.patch
        * 0011--kpartx-use-uint64_t-to-account-slices-start-size.patch
        * 0012--libmultipath-Update-discovery-to-work-with-new-sys.patch
        * 0013-multipathd-crash-on-shutdown.patch
        * 0014--var-run-multipathd.sock-is-world-writable.patch
        * 0015-Increase-timeout-to-30-secs-to-avoid-locking-issue.patch
  * [52b5373] checkers and prio callouts are now SOs
  * [e493cde] debian/rules: use --fail-missing
  * [b1c5baf] devmap_name is no more
  * [fd41e76] bump standards version
  * [82dc3df] drop iscsi to work around #542370
  * [cce7640] new patch:
    0004-check-header-file-for-defintion-of-dm_task_no_flush: check the header
    file for dm_task_no_flush instead
    of one of the installed libs.
  * [876a5fb] new patch: 0005-set-a-soname.patch add a soname to libmultipath
  * [1912767] new patch 0006-add-library-dependencies.patch add libraries to
    the linker call
  * [4d1b506] add dh_makeshlibs call
  * [1ee06d5] install lib with soname

 -- Guido Günther <agx@sigxcpu.org>  Sun, 30 Aug 2009 15:53:24 +0200

multipath-tools (0.4.8-15) unstable; urgency=low

  * [e3fdd6f] add iscsi as a prereq and add verbose logic from mdadm.
  * [9299e3d] On shutdown multipathd flushes its internal message queue
    but we have to check if the messages on the queue are not empty.
    (Closes: #519252)
  * [df5ee21] fix umask of multipathd socket (CVE-2009-0115). Upstream
    commit 0a0319d381249760c71023edbe0ac9c093bb4a74. (Closes: #522813)

 -- Guido Günther <agx@sigxcpu.org>  Mon, 06 Apr 2009 19:36:25 +0200

multipath-tools (0.4.8-14ubuntu11) oneiric; urgency=low

  * Fixes some return logic issues in the blacklist.c:_filter_path function
    where using blacklist and blacklist_exceptions would cause multipathd to
    improperly filter paths. (LP: #789229)
    - The patch was created by Christophe Varoqui in 2007.
      + http://www.redhat.com/archives/dm-devel/2007-November/msg00054.html
      + 0013-libmultipath-filter_path-fix_blacklist_filter_exit.patch
    - [serge-hallyn] swap in the whole upstream git commit and call it
      0013-blacklist_exception_issues.patch.

 -- Craig Magina <craig.magina@canonical.com>  Fri, 27 May 2011 11:47:19 -0400

multipath-tools (0.4.8-14ubuntu10) natty; urgency=low

  * pass '-p part' to kpartx in initramfs script, not '-p p', to
    make sure /dev/mapper/ names are formed as expected.  (LP: #712840)

 -- Serge Hallyn <serge.hallyn@ubuntu.com>  Thu, 03 Feb 2011 18:40:36 -0600

multipath-tools (0.4.8-14ubuntu9) natty; urgency=low

  * Fix segv caused by race condition with free_waiter threads during
    shutdown, using backport from upstream.  (LP: #713237)

 -- dann frazier <dann.frazier@canonical.com>  Thu, 03 Feb 2011 16:37:10 -0700

multipath-tools (0.4.8-14ubuntu8) natty; urgency=low

  * Fix segv on shutdown when log buffer is empty, using patch cherry-picked
    from upstream.  (LP: #488285)

 -- Serge Hallyn <serge.hallyn@ubuntu.com>  Tue, 01 Feb 2011 15:38:36 -0600

multipath-tools (0.4.8-14ubuntu7) natty; urgency=low

  * Add patch to fix the expected pathname from multipath uevents
    (LP: #660597)

 -- Serge Hallyn <serge.hallyn@ubuntu.com>  Tue, 04 Jan 2011 16:06:29 -0600

multipath-tools (0.4.8-14ubuntu6) natty; urgency=low

  * Fix in debian/kpartx.udev:
      - modprobe -q instead of incorrect modprobe -Q (LP: #644481)

 -- Serge Hallyn <serge.hallyn@ubuntu.com>  Tue, 04 Jan 2011 15:58:13 -0600

multipath-tools (0.4.8-14ubuntu5) natty; urgency=low

  * Make the initramfs local-top script wait until all devices
    are mapped, to make sure no /dev/sd* get mounted before
    multipath has a chance to take it. (LP: #686832)

 -- Serge Hallyn <serge.hallyn@ubuntu.com>  Tue, 04 Jan 2011 15:55:48 -0600

multipath-tools (0.4.8-14ubuntu4) lucid; urgency=low

  * debian/control: Move libreadline5-dev build dependency to libreadline-dev.
    (Already done in Debian).

 -- Martin Pitt <martin.pitt@ubuntu.com>  Mon, 08 Mar 2010 14:50:04 +0100

multipath-tools (0.4.8-14ubuntu3) lucid; urgency=low

  * Support failback for Intel Modular Server (LP: #520309).

 -- Colin Watson <cjwatson@ubuntu.com>  Fri, 12 Feb 2010 12:21:42 +0000

multipath-tools (0.4.8-14ubuntu2) jaunty; urgency=low

  * debian/kpartx.udev: Let dmsetup run kpartx, since $kernel doesn't map
    right.
  * debian/initramfs/hooks: Include /lib/udev/kpartx_id.

 -- Timo Aaltonen <tjaalton@ubuntu.com>  Tue, 10 Mar 2009 11:54:01 +0200

multipath-tools (0.4.8-14ubuntu1) jaunty; urgency=low

  * Merge from debian unstable, remaining changes:
    - control:
     + Bump debhelper dependency to install udev rules to
      /lib/udev/rules.d, bump udev dependencies as well.
     + multipath-udeb must not depend on multipath-modules, 
      because the Ubuntu kernel already includes the modules and no 
      package provides m-m.
    - initramfs/hooks: Install rules from /lib/udev/rules.d.
    - kpartx.udev, multipath-tools-boot.init:
      Replace multipath-tools-boot init script with udev rules.
    - multipath-tools.preinst: Fix preinst script to modprobe dm-multipath.
      This will make sure that multipathd will be able to start.
    - multipath-tools.prerm: Add prerm script to not fail when upgrading
      from a broken version of multipathd.
    - patches/1000--set-umask-in-multipathd.patch: Set umask in multipathd.
    - rules: Move udev rules to priority 95, because rules that load
      modules should be >90.
  * Fix bugs (LP: #316851, #320156)
  * multipath-tools.prerm/preinst: Remove checks for old ubuntu
    versions, we don't support upgrading from them anymore.
  
 -- Timo Aaltonen <tjaalton@ubuntu.com>  Thu, 12 Feb 2009 15:07:42 +0200

multipath-tools (0.4.8-14) unstable; urgency=low

  * [6dad4a0] kpartx: use uint64_t to account slices start/size based on
    65d108fbe. Fixes handling of devices >2TB.
    (Closes: #512601) - thanks to Vincent McIntyre for testing
  * [1fe965c] fix failure to gather block device information. Cherry-pick
    88f88d from upstream: With the new sysfs layout the parent device of a
    block device is 'block', and only the parent of this is the 'real' parent.
    Fixes problems on kernels >= 2.6.27.
    (LP: #307032) - thanks to Jens Langner for forwarding this.
  * [85c6d6e] README.Debian: explain howto best access multipath devices
    (Closes: #510911) - thanks to Vincent McIntyre
  * [a2bf65e] FAQ: fix URL to FAQ - thanks to Vincent McIntyre
  * [e65a06d] README.Debian: doc typo
  * [a1de95f] add ja debconf translation
    (Closes: #512857) - thanks to Hideki Yamane
  * [8400b79] rules: drop redo-patches target handled via external script now
  * [50eb583] control: fix maintainer name
  * [fe7e471] drop superflous headers and footers of patches, no functional
    changes

 -- Guido Günther <agx@sigxcpu.org>  Thu, 29 Jan 2009 10:17:36 +0100

multipath-tools (0.4.8-13) unstable; urgency=low

  [ Guido Günther ]
  * [5585feb] simplify udev dependency
  * [4cc8116] add a versioned dependency on dmsetup (Closes: #497686)
  * [9887760] blacklist cciss devices (Closes: #500991)

 -- Guido Günther <agx@sigxcpu.org>  Fri, 03 Oct 2008 12:42:46 +0200

multipath-tools (0.4.8-12) unstable; urgency=low

  * [2ee3c11] udev as of 0.124 doesn't support 'scsi_id -s' anymore
  * [736eaa3] ...unfortunately older udev's don't support 'scsi_id -d'
    properly so add a conflict
  * [49961fa] update bugnumbers for the "dmsetup export" fun
  * [82d47a3] bump standards version
  * [18fb979] add README.source

 -- Guido Guenther <agx@sigxcpu.org>  Thu, 21 Aug 2008 09:28:30 +0200

multipath-tools (0.4.8-11) unstable; urgency=low

  * [3dadace] use the full path to dmsetup so we don't have to worry about
    $PATH
  * [33642da] update initramfs during postinst/postrm (Closes: #477839)
  * [41391c9] Conflict on etch's multipath-tools-initramfs - together with the
    multipath-tools-initramfs NMU from Bernd Zeimetz this provides a clean
    upgrade path from etch to lenny for multipath-tools-initramfs users.
  * [4f8a5d1] Call multipath via udev on block device add/change events This
    helps slow devices when either /etc/init.d/multipath-tools-boot or the
    initramfs script are being run although the devices are not ready yet.
    (Closes: #489850) - many thanks to Janusz Dziemidowicz for his suggestions
    and testing 
  * [5cbb079] add swedish debconf translation (Closes: #492107) - thanks to
    Martin Ågren
  * [12639e9] redo quilt patches - no code changes

 -- Guido Guenther <agx@sigxcpu.org>  Wed, 30 Jul 2008 17:59:03 -0400

multipath-tools (0.4.8-10ubuntu6) jaunty; urgency=low

  * debian/multipath-tools.preinst: Use the same logic as in
    hw-detect to determine if dm_multipath is already loaded.

 -- Timo Aaltonen <tjaalton@ubuntu.com>  Thu, 15 Jan 2009 23:50:18 +0200

multipath-tools (0.4.8-10ubuntu5) jaunty; urgency=low

  * debian/initramfs/hooks: Install from /lib/udev/rules.d 

 -- Scott James Remnant <scott@ubuntu.com>  Tue, 13 Jan 2009 03:05:02 +0000

multipath-tools (0.4.8-10ubuntu4) jaunty; urgency=low

  * Bump debhelper dependency to install udev rules to /lib/udev/rules.d,
    bump udev dependencies as well. 

 -- Scott James Remnant <scott@ubuntu.com>  Mon, 12 Jan 2009 22:03:11 +0000

multipath-tools (0.4.8-10ubuntu3) jaunty; urgency=low

  * fix_udev_scsi_id_arguments.diff:
    Update the arguments for scsi_id. (LP: #306723)
  * fix_sysfs_layout.diff:
    Patch from upstream to use the new sysfs layout. (LP: #307032)

 -- Timo Aaltonen <tjaalton@ubuntu.com>  Thu, 18 Dec 2008 15:32:20 +0200

multipath-tools (0.4.8-10ubuntu2) jaunty; urgency=low

  * debian/control: multipath-udeb must not depend on multipath-modules, 
    because the Ubuntu kernel already includes the modules and no 
    package provides m-m.
  * debian/multipath-tools.preinst: Don't modprobe dm-multipath 
    unconditionally, since it'll break during installation (no 
    modprobe.dep) and when using a monolithic kernel. Instead check for 
    these conditions. (LP: #182009)

 -- Timo Aaltonen <tepsipakki@ubuntu.com>  Tue, 02 Dec 2008 12:28:08 +0200

multipath-tools (0.4.8-10ubuntu1) intrepid; urgency=low

  * Merge from debian unstable, remaining changes:
    - Replace multipath-tools-boot init script with udev rules in
      kpartx.rules.
    - Move udev rules to priority 95, and drop call to dmsetup_env.
    - Add devices as they appear
    - Fix preinst script to modprobe dm-multipath. This will make sure
      that multipathd will be able to start.
    - Fix init script not to die on stop if multipathd is not running.
    - Add prerm script to not fail when upgrading from a broken version of
      multipathd.
    - Set umask in multipathd.
    - Handle udev rules priority change in preinst.

 -- Soren Hansen <soren@ubuntu.com>  Thu, 26 Jun 2008 08:55:33 +0200

multipath-tools (0.4.8-10) unstable; urgency=low

  * [183da2c] Add russion debconf translation (Closes: #486353) - thanks
    to Yuri Kozlov
  * [02b7853] Add pt, de, and fr translations (Closes: #482035, #482845,
    #482905) - thanks to the Portuguese Translation Team, Helge
    Kreutzmann and Jean Guillou

 -- Guido Guenther <agx@sigxcpu.org>  Thu, 19 Jun 2008 13:06:09 +0200

multipath-tools (0.4.8-9) unstable; urgency=low

  * [958c4b1] attach multipath.conf to bugreports
  * [2ac083e] make multipath-tools-boot arch all
  * [2eb8b51] Warn about outdated /etc/multipath.conf via debconf. The
    changed location of udev's /sbin/scsi_id already hit two people.
    Since this renders the system unbootable we should warn about it at
    priority critical. (Closes: #481447)

 -- Guido Guenther <agx@sigxcpu.org>  Sat, 17 May 2008 15:13:40 +0200

multipath-tools (0.4.8-8) unstable; urgency=low

  * libdevmapper doesn't ship the init script anymore so drop that and depend
    on checkroot instead so we have a defined boot order (Closes: 470063)
  * multipath-tools.init: remove superflous stop link in S in the LSB header
  * add boot breakage warning to multipath-tools boot
  * depend on libdevmapper-dev (>= 2:1.02.20) instead of (>= 2:1.02.20-1)
    since this eases backports
  * bump standards version

 -- Guido Guenther <agx@sigxcpu.org>  Sun, 09 Mar 2008 18:55:38 +0100

multipath-tools (0.4.8-7ubuntu2) hardy; urgency=low

  * Install udev rules in initramfs.
  * Use temporary device name for creating partitions using kpartx.
  * Big thanks to Dag Stenstad for testing and helping with debugging!

 -- Soren Hansen <soren@ubuntu.com>  Wed, 19 Mar 2008 19:07:22 +0100

multipath-tools (0.4.8-7ubuntu1) hardy; urgency=low

  * Merge from debian unstable, remaining changes:
    - DebianMaintainerField.
    - Replace multipath-tools-boot init script with udev rules in
      kpartx.rules.
    - Move udev rules to priority 95, and drop call to dmsetup_env.
    - Add devices as they appear.
    - Fix preinst script to modprobe dm-multipath. This will make sure
      that multipathd will be able to start.
    - Add prerm script to not fail when upgrading from a broken version of
      multipathd.
    - Set umask in multipathd.
    - Handle udev rules priority change in preinst.
  * Dropped our hsg80 changes. Kernel handles this correctly now.

 -- Soren Hansen <soren@ubuntu.com>  Mon, 28 Jan 2008 11:09:45 +0100

multipath-tools (0.4.8-7) unstable; urgency=low

  * add watch file
  * move multipath-tools-boot startup to S21 to allow module-loading
    (Closes: #457804)

 -- Guido Guenther <agx@sigxcpu.org>  Tue, 08 Jan 2008 13:49:18 +0100

multipath-tools (0.4.8-6) unstable; urgency=low

  * depend on a libaio that resides in /lib (>= 0.3.106-8) so we can...
  * ...drop link-libaio-static.diff
  * fix_wwid_blacklist.diff: pulled from upstream to fix blacklisting by
    wwid
  * kpartx-docfix.diff: document -g
  * kpartx-remove-dead-code.diff: remove unused commandline option
  * kpartx-fix-extpart-rm.diff: fix partition removal of extended
    partitions

 -- Guido Guenther <agx@sigxcpu.org>  Sat, 01 Dec 2007 15:41:36 +0100

multipath-tools (0.4.8-5ubuntu1) hardy; urgency=low

  * Merge from debian unstable, remaining changes:
    - DebianMaintainerField.
    - Suggest sg3-utils, Conflict with sg-utils.
    - Replace multipath-tools-boot init script with udev rules in
      kpartx.rules.
    - Add /sbin/hsg80_start.
    - Move udev rules to priority 95, and drop call to dmsetup_env.
    - Add devices as they appear
    - Fix preinst script to modprobe dm-multipath. This will make sure
      that multipathd will be able to start.
    - Fix init script not to die on stop if multipathd is not running.
    - Add prerm script to not fail when upgrading from a broken version of
      multipathd.
    - Set umask in multipathd.
    - Handle udev rules priority change in preinst.

 -- Soren Hansen <soren@ubuntu.com>  Thu, 13 Dec 2007 03:03:31 +0100

multipath-tools (0.4.8-5) unstable; urgency=low

  * apply kpartx-fix-udev-dmraid.diff to our shipped udev rules too
  * fix itemized list in control file (Closes: #441176)
  * link statically against libaio since it's in /usr/lib and
    multipath{,d} are in /sbin and we can avoid a libaio udeb for now
  * build a udeb for d-i support (Closes: #440334)

 -- Guido Guenther <agx@sigxcpu.org>  Fri, 07 Sep 2007 19:47:05 +0200

multipath-tools (0.4.8-4) unstable; urgency=low

  * split out initramfs support into a separate package (Closes: #440206)
  * copy persistent bindings into initramfs
  * debian/rules: don't ignore errors on clean (to make lintian happy)
  * multipath-tools-boot.sh: add Default-Stop pseudo header

 -- Guido Guenther <agx@sigxcpu.org>  Fri, 31 Aug 2007 09:47:35 +0200

multipath-tools (0.4.8-3) unstable; urgency=low

  * add a prerm script to handle updates from broken versions that don't allow
    for a stopped multipathd in the init script, really (closes: #439126).

 -- Guido Guenther <agx@sigxcpu.org>  Sun, 26 Aug 2007 10:24:49 +0200

multipath-tools (0.4.8-2) unstable; urgency=low

  * initramfs: mpath_prio_tpc has been renamed to mpath_prio_rdac
  * fetch patches by Hannes Reinecke from dm-devel:
  	* fix udev rule for dmraid: kpartx-fix-udev-dmraid.diff
        * fix extended partition calculation in kpartx: kpartx-fix-extpart.diff
  * fix DEB_BUILD_OTIIONS=nostrip (Closes: #437596)

 -- Guido Guenther <agx@sigxcpu.org>  Mon, 13 Aug 2007 18:32:12 +0200

multipath-tools (0.4.8-1) unstable; urgency=low

  * new upstream release
  * drop clariion-fix-read-buffer.diff, applied upstream
  * init script: don't fail the stop target if multipathd
  * conflict with multipath-tools-initramfs

 -- Guido Guenther <agx@sigxcpu.org>  Sat, 04 Aug 2007 13:08:52 +0200

multipath-tools (0.4.7-9) unstable; urgency=low

  * fix segfault on EMC Clariions
  * add initramfs hooks to support rootfs on multipath
  * version the dependency on dmsetup since the one from etch doesn't
    support -oattr needed by dmsetup_env
  * use LSB functions in init scripts

 -- Guido Guenther <agx@sigxcpu.org>  Tue, 31 Jul 2007 14:01:00 +0200

multipath-tools (0.4.7-8) unstable; urgency=low

  * since Debian's dmestup doesn't include the "export" patch used by other
    distros (#434241), work around this by implementing a minimal dmsetup_env
    that can be used by kpartx.udev (Closes: #376161)
  * add LSB headers to init scripts

 -- Guido Guenther <agx@sigxcpu.org>  Sat, 28 Jul 2007 17:34:48 +0200

multipath-tools (0.4.7-7) unstable; urgency=low

  * create build dirs (Closes: #425910)
  * forward to upstream git b413c9dbe554c2d50aba7c6446ec86f850cf8dde
  * drop libmultipath-cache-sysfs_devices.diff, applied upstream

 -- Guido Guenther <agx@sigxcpu.org>  Fri, 27 Jul 2007 22:25:29 +0200

multipath-tools (0.4.7-6) unstable; urgency=low

  * kpartx.udev: fix path to kpartx_id
  * install kpartx_id
  * debian/control: add XS-Vcs-Browser

 -- Guido Guenther <agx@sigxcpu.org>  Sun, 22 Jul 2007 15:38:05 +0200

multipath-tools (0.4.7-5) unstable; urgency=low

  * forward to upstream git 00fe3ac6ff515bec4a2c7385d6e2e4a7ed5dfb36 
  * new patch: libmultipath-cache-sysfs_devices.diff (Closes: #433949)

 -- Guido Guenther <agx@sigxcpu.org>  Fri, 20 Jul 2007 23:15:27 +0200

multipath-tools (0.4.7-4) unstable; urgency=low

  * move to git
  * Drop patches applied upstream:
  	  * fix-segfault-on-disappearing-paths.diff
          * exclude-quilt.diff
          * scsi_id.diff
          * Makefile_cleanups.diff
  * use dh_installudev
  * no need to build-depend on libsysfs-dev anymore
  * build-depend on libaio-dev

 -- Guido Guenther <agx@sigxcpu.org>  Fri, 29 Jun 2007 11:31:28 -0400

multipath-tools (0.4.7-3) experimental; urgency=low

  * forward to upstream git as of 178b93111d54828a89ad280c0aaaea0812343a6a
    (Closes: #427532, #365363)
  * adjust scsi_id.patch to apply again
  * drop udev.patch, not needed
  * make sure multipath-tools-init runs after udev so the /dev/mapper/
    entries appear in the correct place
  * debhelper version 5 (Closes: #425910)
  * split out kpartx into a separate package (Closes: #422600)

 -- Guido Guenther <agx@sigxcpu.org>  Fri, 08 Jun 2007 11:51:00 +0200

multipath-tools (0.4.7-2ubuntu3) gutsy; urgency=low

  * Fix preinst script to modprobe dm-multipath. This will make sure
    that multipathd will be able to start.

  * Fix init script not to die on stop if multipathd is not running.

  * Add prerm script to not fail when upgrading from a broken version of
    multipathd.

 -- Fabio M. Di Nitto <fabbione@ubuntu.com>  Fri, 10 Aug 2007 13:03:39 +0200

multipath-tools (0.4.7-2ubuntu2) gutsy; urgency=low
  
  * Fix udev rule to load dm-multipath.

 -- Fabio M. Di Nitto <fabbione@ubuntu.com>  Wed, 13 Jun 2007 11:56:52 +0200

multipath-tools (0.4.7-2ubuntu1) gutsy; urgency=low

  * Merge from debian unstable, remaining changes:
    - Remove multipath-tools-boot init script in favour of udev rules.
    - Update udev rules as described in 0.4.7-1.1ubuntu3.
    - Add /sbin/hsg80_start as described in 0.4.7-1.1ubuntu3.
    - debian/control Ubuntu maintainer foobar.

 -- Fabio M. Di Nitto <fabbione@ubuntu.com>  Wed, 16 May 2007 11:02:20 +0200

multipath-tools (0.4.7-2) unstable; urgency=low

  [ Bastian Blank ]
  * Use /lib/udev/scsi_id. (closes: #358985)

  [ Guido Guenther ]
  * Acknowledge NMU - thanks John! (closes: #382244)
  * use quilt for the git patch
  * remove Bastian and Andres from Uploaders on their request
  * cleanup pp_hds_modular so the package is rebuildable several times
  * scsi_id.diff, Makefile-cleanups.diff, remove-arch-ifdefs.diff, udev.diff:
    split out Debian's modifications into separate patches
  * remove now superflous multipath.sh (closes: #350814)
  * bump standards version to 3.7.2 (no source changes) 

 -- Guido Guenther <agx@sigxcpu.org>  Wed, 20 Dec 2006 17:40:59 +0100

multipath-tools (0.4.7-1.1ubuntu3) feisty; urgency=low

  * Remove multipath-tools-boot init script.

  * Wild changes and updates to udev rules:
    - All the hsg80 MULTIBUS FAILOVER are now handled here.
    - Fix rule to call kpartx also on "change" udev events.
    - Invoke multipath -v 0 device to make sure we hot plug
      all devices into multipath.

  * Add /sbin/hsg80_start that wraps all the work to make an hsg80 in
    MULTIBUS FAILOVER working properly.
    This is automatically called by udev.

  (Closes LP: #98518)

 -- Fabio M. Di Nitto <fabbione@ubuntu.com>  Wed, 04 Apr 2007 08:17:48 +0200

multipath-tools (0.4.7-1.1ubuntu2) feisty; urgency=low

  * Remove devmap_name from this package, and Depend on dmsetup instead.
    Fixes file overwrite conflict with dmsetup.  (LP 84894.)

 -- Ian Jackson <iwj@ubuntu.com>  Tue, 13 Feb 2007 16:16:46 +0000

multipath-tools (0.4.7-1.1ubuntu1) feisty; urgency=low

  * Merge from debian unstable, remaining changes:
    - remove stop links from rc0 and rc6
    - suggest sg3-utils, conflict sg-utils
    - fix path to scsi_id
    - ubuntu udev rules
    - set umask

 -- Scott James Remnant <scott@ubuntu.com>  Tue, 28 Nov 2006 15:24:16 +0000

multipath-tools (0.4.7-1.1) unstable; urgency=medium

  * Added missing dependency on dmsetup.  Closes: #381068.
  * Fixed PID file handling.  Closes: #294066.
  * Pulled in numerous fixes from upstream git tree to fix
    various segfaults, spewing garbage onto the console, etc.
    Tree is now synced to upstream git as of commit
    40b575955cc189aa993e6a030b66b5fef6bcf288 on July 19, 2006, 
    which is the current state of the upstream tree.  Closes: #382214.

 -- John Goerzen <jgoerzen@complete.org>  Wed,  9 Aug 2006 11:52:08 -0500

multipath-tools (0.4.7-1ubuntu8) edgy; urgency=low

  * Remove stop script symlinks from rc0 and rc6.

 -- Scott James Remnant <scott@ubuntu.com>  Fri, 15 Sep 2006 17:30:19 +0100

multipath-tools (0.4.7-1ubuntu7) dapper; urgency=low

  * Fix typo in init script that was executing hsg80_init unconditionally.

  * Suggests: sg3-utils and Conflicts: sg-utils (obsoleted).

 -- Fabio M. Di Nitto <fabbione@ubuntu.com>  Mon, 22 May 2006 09:56:07 +0200

multipath-tools (0.4.7-1ubuntu6) dapper; urgency=low

  * no changes upload to rebuild with new libdevmapper.

 -- Fabio M. Di Nitto <fabbione@ubuntu.com>  Wed, 10 May 2006 09:31:20 +0200

multipath-tools (0.4.7-1ubuntu5) dapper; urgency=low

  The "give Scott a crying biscuit" release.

  * Apply patch from Dennis Kaarsemaker.
  (Closes Ubuntu: #41318)

 -- Fabio M. Di Nitto <fabbione@ubuntu.com>  Wed, 26 Apr 2006 10:20:07 +0200

multipath-tools (0.4.7-1ubuntu4) dapper; urgency=low

  * Remove 2 extra lines from multipath.rules that were really not supposed
    to be there.

 -- Fabio M. Di Nitto <fabbione@ubuntu.com>  Thu, 06 Apr 2006 17:43:10 +0200

multipath-tools (0.4.7-1ubuntu3) dapper; urgency=low

  * Add hsg80_init function to multipath-tools-boot init script.
    The script takes care to perform a proper initialization of the disks
    when the hsg80 is configured in multibus failover mode.

    NOTE: multipathd is not able to understand properly what happens in this
    multi-bugs situation and it will require manual kill and restart once
    the disks have been readded to the system, otherwise failover is not
    guaranteed and syslog will be flooded.

 -- Fabio M. Di Nitto <fabbione@ubuntu.com>  Thu, 06 Apr 2006 09:33:51 +0200

multipath-tools (0.4.7-1ubuntu2) dapper; urgency=low

  * Fix socket permissions.

 -- Fabio M. Di Nitto <fabbione@ubuntu.com>  Tue, 04 Apr 2006 18:20:20 +0200

multipath-tools (0.4.7-1ubuntu1) dapper; urgency=low

  * Fix path to scsi_id.

  * Make install: target depends on build in debian/rules.

  * Change NAME to multipathd in init scripts so that we can actually stop
    multipathd.

  * Swap multipath-tools-boot and multipath-tools init scripts order in
    postinst and make multipath-tools-boot start.

  * UVF exception granted by Colin Watson.

 -- Fabio M. Di Nitto <fabbione@ubuntu.com>  Tue, 04 Apr 2006 06:31:09 +0200

multipath-tools (0.4.7-1) unstable; urgency=low

  * New upstream version. 
    - Build against libsysfs2. (closes: #355775)
  * Acknowledge NMU. (closes: #337081)

 -- Bastian Blank <waldi@debian.org>  Fri, 17 Mar 2006 17:23:03 +0100

multipath-tools (0.4.6-1) unstable; urgency=low

  * New upstream version.

 -- Bastian Blank <waldi@debian.org>  Thu, 09 Feb 2006 22:12:52 +0100

multipath-tools (0.4.5-3) unstable; urgency=low

  * Fix kpartx compiling errors and dos support.

 -- Bastian Blank <waldi@debian.org>  Fri, 30 Sep 2005 13:01:55 +0200

multipath-tools (0.4.5-2) unstable; urgency=low

  * Move boot init script before udev and load dm-multipath module.

 -- Bastian Blank <waldi@debian.org>  Wed, 28 Sep 2005 19:35:49 +0200

multipath-tools (0.4.5-1) unstable; urgency=low

  * New upstream version.
  * Move device check logic to udev rules.
  * Don't longer create devices in /dev by default.

 -- Bastian Blank <waldi@debian.org>  Mon, 19 Sep 2005 16:32:00 +0200

multipath-tools (0.4.2.4-2) unstable; urgency=medium

  * New maintainer.
  * Rebuild against new libdevmapper.

 -- Bastian Blank <waldi@debian.org>  Fri, 04 Mar 2005 15:16:30 +0100

multipath-tools (0.4.2.4-1) unstable; urgency=low

  * New upstream.
    NOTE: This is actually upstream's 0.4.2 but 0.4.2.3 came first for some
    reason.
  * Use start-stop-daemon to control the multipathd daemon and do it's own
    PID file handling (which is now commented out of the daemon itself)

 -- Patrick Caulfield <patrick@debian.org>  Fri, 28 Jan 2005 15:15:01 +0000

multipath-tools (0.4.2.3-1) unstable; urgency=low

  * New upstream
  * Remove initrd files as they break things.
    Closes: #288150
  * Fix some duplicate patching.

 -- Patrick Caulfield <patrick@debian.org>  Mon, 17 Jan 2005 11:19:20 +0000

multipath-tools (0.4.1-1) unstable; urgency=low

  * New upstream
    Closes: #295926, #286789
  * Include initrd scripts contributed by Guido Guenther
    Closes: #286791

 -- Patrick Caulfield <patrick@debian.org>  Thu, 13 Jan 2005 09:25:42 +0000

multipath-tools (0.4.0-1) unstable; urgency=low

  * New upstream

 -- Patrick Caulfield <patrick@debian.org>  Fri, 24 Dec 2004 11:54:44 +0000

multipath-tools (0.3.9-1) unstable; urgency=low

  * New upstream

 -- Patrick Caulfield <patrick@debian.org>  Tue,  7 Dec 2004 13:15:15 +0000

multipath-tools (0.3.8-1) unstable; urgency=low

  * New upstream
  * Fix error in preinst, when upgrading.
  * Don't clean klibc directory. 
    Closes: #283043

 -- Patrick Caulfield <patrick@debian.org>  Mon, 29 Nov 2004 08:56:50 +0000

multipath-tools (0.3.7-1) unstable; urgency=low

  * New upstream

 -- Patrick Caulfield <patrick@debian.org>  Sat, 13 Nov 2004 11:14:35 +0000

multipath-tools (0.3.6-1) unstable; urgency=low

  * Initial upload. Based loosely on upstream's work
    Closes: #277898

 -- Patrick Caulfield <patrick@debian.org>  Wed,  3 Nov 2004 10:16:34 +0000

